Continuous mixer product description
|
Model
|
Yield (kg/h)
|
|
GCM75
|
100-300
|
|
GCM100
|
300-500
|
|
GCM130
|
500-1000
|
|
GCM150
|
800-1500
|
|
GCM180
|
1500-2500
|
|
GCM230
|
2500-5000
|
The hard tooth face gear transmission precision thrust block device using the professional design of twin rotor continuous mixer reducer, the output shaft using high strength 42CrMo, other gear and shaft parts with high strength of 20CrMnTi materials; gear after carburizing, quenching, grinding processing, high precision, high hardness of gear; gear accuracy GB10095-88, level 6, tooth surface hardness HRC-54 ~ 62, the output shaft front end configuration of thrust bearing in the hollow, the axial thrust screw at work, the machine with small volume, high carrying capacity, stable transmission, low noise, high efficiency.
Continuous mixer is the most obvious characteristic is the continuous feeding, the feeding rate of productivity based on. Keep constant feed, can improve the rotor speed, to obtain more shear stress, or slightly close the discharge gate, improve the discharge temperature. Mixer under normal operation, the formation of independent mixing environment, completely affected by the forming requirements.
Twin rotor continuous mixer has the advantages of:
1, by weight loss type feeding system of advanced, high degree of automation, high production efficiency.
2, continuous production, stable production condition formula, the production of quality products.
3, continuous operation, need a few operators.
4, masterbatch production workshop environment clean.
5, screw and barrel self-cleaning ability, convenient transformation glue.
6, more power, more energy-efficient, more high yield.
The mixture of 7, excellent mixing effect, better dispersed material.
8, installation, low maintenance cost.
Double rotor continuous mixer machine faults:
1 need to using weight weighing and metering equipment advanced;
2 not easy manual operation, suitable for automatic control.
Continuous mixer machine main application material:
PE, ABS, PS, EVA ABS, EVA Color Masterbatch; flame retardant masterbatch; PE, PP, PS and other filling degradable masterbatch
PE, EVA + calcium carbonate, talc, titanium dioxide, carbon black filled modification;
LDPE, HDPE, LLDPE, MDPE sheath material, insulating material; radiation crosslinking material, cable sheathing, thermal shrinkage tube material such as cable material;
PPR pipe materials, crosslinked PE pipe materials; TPR, TPU, TPV thermoplastic elastomer, EVA and hot melt adhesive etc.;
|
Your Current Location：